Rev-A-Shelf Trim-to-Fit Base Drip Tray CabinetAccessory, Silver, SBDT-3336-S-1

The Rev-A-Shelf SBDT-3336-S-1 Plastic Under Sink Base Drip Tray is your frontline shield against potential under-sink cabinet havoc caused by minor leaks. This ingeniously designed tray protects your cabinet’s base and channels excess moisture to detect leaks. Crafted from resilient plastic that refuses to buckle or warp, this tray offers hassle-free cleanup and demonstrates remarkable resistance to most common household chemicals.

Double-check your cabinet’s opening (inside dimensions) to allow the best fit. Measure side to side (width), front to back (depth or length), and top to bottom (height). Double-check to ensure your product is within measurements, and remember to consider any obstructions (plumbing, hinges, etc.). This sink base tray will fit your 36-inch sink base kitchen cabinet that has a minimum trim size of 31.5 by 21.5 inches.

The series is designed for installation in new cabinets. The product is very rigid and may need help getting into existing cabinets where a center divider exists. The unit can be installed to an existing cabinet but may require extensive modification to fit around the existing plumbing.

This product may require extra cuts or modification if installed into existing sink base cabinets where your plumbing is coming through the floor rather than the rear of the cabinet.

Invest in this Rev-A-Shelf SBDT-3336-S-1 Plastic Under Sink Base Drip Tray and safeguard your under-sink cabinet from moisture, ensuring longevity and peace of mind.

• Maximize space and protect your under-sink cabinet from damage with this base drip tray
• Made from strong plastic material that is very rigid, chemical-proof, and does not fold or bend
• Unique design not only protects the bottom of your cabinet by holding water, but the tray funnels excessive water to the front of your cabinet and out onto the floor, alerting you of the leak
• Using a standard utility knife, you can trim the tray to fit properly
• Liquid capacity of 1.77 quarts and is recommended for a 33 or 36-inch sink base kitchen cabinet
• Designed for new cabinets, this rigid product may require assistance for installation in existing cabinets with center dividers and may entail extensive modifications to accommodate existing plumbing
• May require extra cuts or modification if installed into existing sink base cabinets where your plumbing is coming through the floor rather than the rear of the cabinet
• Minimum trim size: 31-1/2″ W x 21-1/2″ D
• Included: (1) Silver drip tray
• Material: Plastic
• Color: Metallic Silver
• Dimensions (W x D x H): 34.5″W x 23.25″D x 0.75″H
• Weight: 3.55 pounds
• Manufacturer warranty: Limited-lifetime warranty