Variable pitch,4/6 pitch, positive rake teeth reduce vibration and clear chips to improve cutting speed; attached pass through shank arbor is convenient and time-saving; requires 4-5/16″ pilot drill. Used in applications such as cutting holes in wood, plastic or any machinable metal including nail-embedded wood, plywood, pipe and stainless steel..
Highlights:
- Type: Bi-Metal
- Arbor Attached
- Dia. : 5-1/2″
- Positive rake teeth for more aggressive cutting action
- M3 High speed steel edge wire for toughness and excellent wear resistance
- Deeper gullets for better chip clearance
- Better tooth match for smoother cutting
- Modified 4/6 raker set for equal cutting load
- No separate arbor required
- 1-1/2″ cutting depth will cut through a 2″ x 4″
Reviews
There are no reviews yet.