Bulls Eye 1-2-3 Spray is the all purpose, all surface primer-sealer spray. It provides 20% greater coverage and hide compared to competition. It effectively hides dark colors and blocks stains from water, smoke, nicotine, crayon, tannin, graffiti and other common stains. It seals porous surfaces like wood, drywall, cured plaster and brick for better top coat coverage and a more even finish. Plus, it??s great for high pH surfaces like concrete, stucco and joint and textures compounds
Zinsser Bulls-Eye 1-2-3 is a high hide water-based styrenated acrylic water-based primer-sealer stain blocker and bond coat designed for priming all surfaces. Apply to interior and exterior walls, ceilings, doors, trim, fascia, soffits, foundations, railings, and related paintable surfaces. Bulls- Eye 1-2-3 bonds to wood, plaster, concrete, gloss enamels, hardboard, glass and tile. It provides a rust inhibitive coating on iron railings, steel frames, piping, etc. It resists the growth of mold and mildew in damp, humid environments. It resists high pH surfaces (up to 12.5) and seals most porous surfaces. Bulls-Eye 1-2-3 traps most stains in the primer film including graffiti, grease, rust, cedar and redwood tannin, creosote, and asphalt stains
Highlights:
- Size: 13 Oz.
- Color: White
- Interior & exterior
- Guaranteed one coat hide
- All purpose, all surface primer-sealer
- Great under or over any paint
- Dries in minutes; topcoat in 30 minutes
- High-output any angle comfort tip spray
- Bonds to glossy surfaces without scuff sanding
- Formulated with stain-blocking resins
- Rust inhibitive ?C may be used to prime ferrous metal
- Is mold and mildew resistant
- Fast drying ?C Recoat in under 1 hour
- Sticks to all surfaces and sands easily
- High hiding formula blocks most stains
- Excellent for sealing water soluble tannin bleed on cedar and redwood
- Easy soap and water clean-up
- Alkyd-base aerosol, stain & odor blocking, primer-sealer, high-hiding stain blocking primer that blocks
- 6 per pack
Application:
Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle Do not strike can. Contact Rust-Oleum. Shake often during use. Hold can upright 10-16?? from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near open flame
Clean-Up:
Wipe off tip before storing. Clean-up wet paint with xylene or mineral spirits. Properly discard empty container. Do not burn or place in home trash compactor. If the valve clogs, twist and pull off spray tip and rinse in a solvent such as mineral spirits. Do not insert any object into can valve opening
Physical Properties:
- Resin Type: Styrene Acrylate Copolymer
- Pigment Type: Titanium Dioxide
- MIR: 1.2 Max
- Fill Weight: 13 ounces
- Solvents: Acetone, Aliphatic Hydrocarbons
- Recommended Dry Film Thickness (DFT) Per Coat: 1.5-2.5 mils (37.5-62.5??)
- Practical Coverage at Recommended DFT (assume 15% material loss): 10-12 sq.ft./can (0.9-1.1 m2)
- Dry Times at 70-80??F (21-27??C) and 50% Relative Humidity: Touch (30 minutes), Recoat (1 hour), Stain sealing (2 hours 24 hours over cedar), Full hardness (7 days)
- Shelf Life: 5 years
- Flash Point: -156??F (-144??C)
Reviews
There are no reviews yet.