Fan forced electric air heaters shall be UL Listed, factory rated at 120V, 208V, and dual field rated from 208V to 240V. A painted 20 gauge wall mounting can with six knockouts and 34 cubic inch wiring compartment shall be provided with each complete heater. Each complete heater shall be of unitized construction and attach to the wall can with a single screw and shall be self-contained and completely separate from the wall mounting can. Element is of nichrome type wire wrapped on mica insulators with an over- sized 25 amp rating at 240V, high temperature manual reset limit switch and an over-temperature thermal back-up. A two stage centrifugal blower shall be driven by an impedance protected motor. The motor shall be totally isolated from the heating chamber. Metal grill shall be of one piece, 20-gauge construction and finished with a powder coat paint system.
Highlights:
- Voltage: 208 Volt
- Wattage: 2000 watts
- Primary and Secondary Thermal Safeguards
- Commercial grade high temperature manual reset
- Over temperature one-time thermal device
- Nichrome coil element for quick heat
- Powder coat paint process eliminates sharp metal edges
- Wall can designed for ease of installation
Reviews
There are no reviews yet.