Highlights:-
-
Female Bulkhead Connector
-
Working pressure up to 10,000 psi, depending on tube and fitting size.
- Used with copper, brass, steel, aluminum, and other tubing that can be flared.
- Applications include medium and high pressure lines on heavy construction, agricultural, and transportation equipment.
- Meets or exceeds ASA, ASME, SAE, and MS specifications.
- Good resistance to vibration. Use two or three piece nut design where greater vibration resistance is required.
- Tube Outside Diameter: 1″
- Female Pipe Thread Size: 1-5/8″
- Hex: 1-5/8″
- Cross Reference: C5275 x 16
Assembly Instructions:-
-
Slide nut on tubing. Threaded end of nut must face out.
-
Slide sleeve on tubing (3-piece assembly). Collar end of sleeve must face out.
-
Flare tubing and check flare diameter. Examine for excessive thin-out. On thin wall tubing, use double flare to prevent pinch-off.
-
Assemble tubing to fitting body. Tube nut should be turned hand tight.
-
Tighten assembly with a wrench.
?
Reviews
There are no reviews yet.