Your pool is going to look super clean when this Intex 2500 GPH Filter Pump With Timer makes its way to your backyard.

Designed for Intex 24-foot and 18-foot Easy Set pools, Frame Set pools, Ellipse Oval pools, Rectangular Frame pools and similar sized swimming pools from other manufacturers such as Sand-n-Sun and Aqua-Leisure.

It features a built-in automatic timer that allows you to set a daily cleaning cycle convenient to your busy schedule. For added protection, this model features a ground fault circuit interrupter (GFCI) which prevents circuit overloads. Your pump will shut off automatically if the electrical current is exposed to water. It uses Type B filter cartridges (29005E) which should be changed every couple of weeks.

Easily keep your above ground pool water clean and refreshing with the Intex 2500 GPH Filter Pump With Timer.

This package comes with replacement parts.

We know that wear and tear can happen to anything. We carry the Intex Plunger Valve, so you can replace that part when the time comes. This assembly includes a plunger valve, hose o-ring, and step washer.

Pump
Your above ground pool will be clean, clean, clean with the Intex 2500 GPH Filter Pump With Timer
Designed for Intex 24-foot and 18-foot Easy Set pools, Frame Set pools, Ellipse Oval pools, Rectangular Frame pools and similar sized swimming pools from other manufacturers such as Sand-n-Sun and Aqua-Leisure
Pump Flow Rate: 2,500 gallons
System Flow Rate: 1,900 gallons
Ground fault circuit interrupter (GFCI) prevents circuit overloads and safely protects your pump from electrical malfunction.
Pump will shut off automatically if the electrical current is exposed to water
A built-in timer allows you to easily set a daily 2, 4, 6, 8 or 12-hour cleaning cycle
Hoses included with this swimming pool pump have an inside diameter of 1.5-inches and are 5-feet in length (Pools not manufactured by Intex and non-standard pools may require plumbing adapters which may be purchased at a local hardware or pool store)
Installation couldn??t be easier, just connect the hoses and plug your filter pump into a 110 to 120 volt outlet
Double insulated for safety and long life
Air release valve featured on this pool pump eliminates air trapped inside the filter chamber
Sediment flush valve at the bottom of the filter chamber for easier maintenance
Uses type “B” Intex filters (1 included)
Conforms to safety certifications and listings by UL and CSA and is rated 120 volt AC
Rated at 60 Hz, 2.1 A
Warranty: 2 years
Dimensions: 16 x 13.75 x 18.5 inches
Weight: 24.2 pounds
Part number: 28633EG
Replacement parts
Replacement pool filter pump plunger on/off valve to be used with Intex aboveground pools using 1-1/2″ diameter hoses with 2-1/2″ threaded connector fittings
Replace your old plunger valve(s) or upgrade to the Intex Plunger Valve system, makes changing hoses and pumps a breeze
Assembly includes a plunger valve, hose o-ring, and step washer
For use with 28635EG, 28633EG, 28671EG, 28645EG, 28647EG, 28651EG, 28677EG, & 28681EG filter pumps
Part number: 25010
Manufacturer warranty: Other (see description)