Little Giant 506420 Energy Saving 1/3 Hp Sump Pump

“LITTLE GIANT” ENERGY SAVING 1/3 HP SUMP PUMP

The ES33D1-10 pump from Little Giant is an energy-saving, high performance, fully submersible sump/effluent pump, designed for the professional plumbing contractor for use in residential and light commercial applications. Automatic operation is achieved with a diaphragm pressure switch. The ES Series Pumps draw less energy while delivering greater pump flow and overall performance. Uses include basement sumps, excavations, loading docks, construction sites, underground passageways and other applications requiring high volume water dispersal.
1/3 HP, 115 Volt, 10′ Power Cord

• Powerful Permanent Split Capacitor (PSC) motor for high starting and running torque has upper sleeve and lower ball bearings
• Recessed vortex impeller made of tough engineered composite material to reduce clogging
• Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces) assures maximum protection against pump failure
• Epoxy coated cast iron motor housing for corrosion and rust resistance.
• Vortex style, engineered thermoplastic impeller
• Oil-filled motor housing for lifetime bearing lubrication and maximum heat dissipation
• 1-1/2″ FNPT vertical discharge
• Cast iron pump housing with protective epoxy coating for corrosion resistance, glass filled polypropylene volute
• Automatic operation with vertical diaphragm pressure switch operates pump when water depth is approximately 11″ and shuts pump off in approximately 5″ of water (switch is non-adjustable)
• Model No. ES33D1-10 Pumps 40 GPM at 10′ TDH (max. 20′ TDH) – 5.0 amp full load draw
• Limited warranty: 12 months from date of installation or 18 months from date of manufacture, which ever comes first
• Thermal overload protection

Specifications :

• Horsepower – 1/3
• Flow – 52 GPM @ 5′ of Head
• Cord Length – 10′?
• Shut Off – 20′
• Voltage – 115?
• Hertz – 60?
• Amps – 5
• Watts – 475
• Weight – 28 lbs.
• Height -9.3″
• Width – 11.8″
• Length? – 9.8″