Peel & Seal is the original, self-stick roll roofing specifically designed for low slope residential and commercial applications. Composed of a patented formula (consisting of laminated aluminized foil, high-density polymer films and a thick layer of rubberized asphalt), Peel & Seal provides a long lasting, durable, maintenance-free roofing surface.
From dormers, residential sunroom additions, ??open?? porches, and mobile home roofs, to industrial and agricultural buildings where low slope roofs are common place, Peel & Seal is an excellent solution for these applications. The self-adhering, weatherproof, reflective surface not only forms a highly effective barrier to the elements, but also limits solar heating to help keep the temperature of building interiors significantly cooler.
Applying Peel & Seal is easy. No tar, torches, mops, glues, tapes, or fasteners are required a utility knife and hand roller are the only tools needed. Following preparation of the surface, simply peel off the release liner, unroll Peel & Seal to the proper length.
Maintenance-free Peel & Seal will not crack or dry out after being applied.
Highlights:
- Width: 6″
- Length: 33-1/2′
- Mil: 45
- Self-Stick
- Aluminum finish
- Used where waterproofing is needed. Weatherproof
- For roofing, patching, gutter repair, flashing, and general waterproofing where the membrane will be exposed
- A laminate of reflective aluminum foil, rugged, cross-linked polymer films, and a thick layer of rubberized asphalt
- Designed for low-slope roof applications
- For mobile homes, trailers, RVs, and sunrooms
- The asphalt compound adheres to most surfaces and seals around most punctures, forming a protective waterproof barrier
- Aluminum surface reflects heat
- Puncture and abrasion resistant
- Stretches to allow for building movement
- Conforms to odd shapes
- Requires no coating or covering for exposure to sunlight
- Tested to ASTM D 1970, meets the requirements of ICC-ES AC-75, and has a Class A Fire rating when installed on a non-combustible deck
- Coverage sq. ft. may vary depending on amount of over lap
Peel & Seal is perfect for hundreds of uses ranging from full-roof applications to patching gutters and vent pipes. Fully pliable and providing a secure seal at edges, corners and over gaps, it is ideal for roof areas that are often difficult to waterproof, including locations where ducts, vents, chimneys, or air conditioning units either protrude through, or are roof mounted.
Reviews
There are no reviews yet.