This is a complete package! Package includes, MTX loaded car subwoofer system with Mono amplifier and complete amplifier installation kit!
The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12″ sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. The Terminator subwoofers used in the enclosure include polypropylene dustcaps that are durable allowing them to survive the rigors of most trunks and are lightweight allowing them to efficiently move using less power. Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts Peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil helping to dissipate the heat generated during extended play. The enclosure itself is made using extra strength 5/8″ MDF (medium density fiberboard) which is the preferred material for subwoofer enclosures. Where other manufacturers only use a 1/2″ board, the MTX 5/8″ board is stronger ensuring that the enclosure can contain the massive low frequency sound waves generated by the subwoofers without problems.
Thunder Bass, Hard hitting Dual 12 inch MTX subwoofers
Designed For SPL, Rock your car and the neighborhood!
Easy Installation, Mounts quickly in most trunks and SUVs
We are an authorized MTX dealer!
- Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub enclosure, Sound Storm EV monoblock amplifier and a complete 8 gauge amp installation wiring kit
- MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp; Boasts 1200 watts max power and 400 watts RMS; Features rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil
- MTX enclosure features solid MDF construction and thick black carpet; Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches
- Sound Storm EV Monoblock A/B MOSFET power Amplifier delivers 1500 watts MAX x 1 channel @ 2 ohms and RMS power: 563 watts x 1 channel @ 4 ohms; 1125 watts x 1 channel @ 2 ohms; Dimensions (15.5″ L x 10″ W x 2 3/8″ H); Remote control included
- Install your amp with ease with the competition quality Sound Storm AKS8 Complete 8 Gauge Amplifier Installation Kit
- **Subwoofer:**
- MTX TNE212D 12″ 1200W Car Subwoofer Enclosure
- MTX Audio Logo on Dustcap
- 48oz. Magnet
- Final Impedance: 2 Ohm
- Frequency response: 37 150 Hz
- Terminator logo embroidered into carpet front
- Part Number: TNE212D
- 1 Year Manufacturer Warranty
- **Amplifier:**
- SOUND STORM SSL EV1500M 1500W Mono block A/B Car Amplifier
- 2 Ohm Stable Mono Block
- High/Low X over
- Variable low pass crossover: 40 150Hz
- Fixed high pass crossover (200Hz)
- Variable 0 to +18dB Bass Boost
- Variable input gain control
- Power and protection LED indicators
- Thermal, overload and speaker short protection
- Line and speaker level inputs
- Chrome plated RCA connectors and screw terminals
- Frequency response: 9Hz 150Hz (+/ 3dB)
- Signal to noise ratio 105dB
- THD at RMS output 0.01%
- Damping factor 125+
- Part Number: EV1500M
- 1 Year Manufacturer Warranty
- **Amp Kit:**
- SOUND STORM AKS8 Complete 8 Gauge Amplifier Installation Kit
- 20 ft. 8 Gauge Red power cable
- Competition high quality fuse holder
- 1/4″ Gold plated ring terminal
- 3 ft. 8 Gauge Black ground cable
- #10 Gold plated ring terminal
- 16 ft. 18 Gauge Blue turn on wire
- 20 ft. High performance RCA interconnect
- (3) Rubber grommets
- 30 ft. Speaker wire
- 5/16″ Gold plated ring terminal
- 6 ft. Split loom tubing
- (20) 4″ Wire ties
- Part Number: AKS8
- 1 Year Manufacturer Warranty
Reviews
There are no reviews yet.