MTX TNE212D 12" 1200W Dual Loaded Subwoofer Box + 1500W Amp + Wiring + Capacitor

The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12 inch sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. This kit comes complete with a 1500W monoblock A/B amplifier, wiring kit, and 2 farad capacitor.

The Terminator subwoofers used in the enclosure include durable polypropylene dust caps that can survive the rigors of most trunks and are lightweight, allowing them to efficiently move using less power.

Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil and dissipate heat. The enclosure itself is made of extra strength 5/8 inch MDF.

Have everything you need to achieve audio perfection with the included 1500 watt, Monoblock A/B amplifier, wiring kit, and 2 farad capacitor as well.

• Loaded subwoofer enclosure
• 1200 watt of max power, 400 watts RMS
• Rubber surround
• Polypropylene cone
• MTX audio logo on dustcap
• 2 inch aluminum single 4 ohms voice coil
• 48 ounce magnet
• Final impedance: 2 ohms
• Frequency response: 37 150 Hz
• 5/8 inch solid MDF construction
• Black carpeting covering the enclosure
• Terminator logo embroidered into carpet front
• Dimensions: 29.69 x 13.5 x 11.125 x 14 inches
• Warranty: 1 year
• Amplifier
• RMS power: 563 watts x 1 channel @ 4 ohms; 1125 watts x 1 channel @ 2 ohms
• Max power: 1500 watts x 1 channel @ 2 ohms
• 2 ohm stable monoblock
• High/low crossover
• Variable low pass crossover: 40 150Hz
• Fixed high pass crossover (200Hz)
• Variable 0 to +18dB bass boost
• Variable input gain control
• Power and protection LED indicators
• Thermal, overload and speaker short protection
• Line and speaker level inputs
• Chrome plated RCA connectors and screw terminals
• Frequency response: 9Hz 150Hz (+/ 3dB)
• Signal to noise ratio 105dB
• THD at RMS output 0.01%
• Damping factor: 125+
• Remote control included
• Dimensions: 15.5 x 10 x 2.375 inches
• Warranty: 1 year
• Wiring kit
• 20 foot 8 gauge red power cable
• Competition high quality fuse holder
• 0.25 inch gold plated ring terminal
• 3 foot 8 gauge black ground cable
• Number 10 gold plated ring terminal
• 16 foot 18 gauge blue turn on wire
• 20 foot high performance RCA interconnect
• 3 rubber grommets
• 30 foot speaker wire
• 0.3125 inch gold plated ring terminal
• 6 foot split loom tubing
• 20, 4 inch wire ties
• Warranty: 1 year
• Capacitor
• Equivalent Series Resistance (ESR): 0.00195 ohms @ 120 Hz @ 25 degrees C
• High level input voltage: 24
• Percent capacitance tolerance: 10
• Low level input voltage: 20 volts
• Remote terminal screw
• Capacitance: 2 farad, 2 million microfarad
• Weight: 3 LBS
• Product Condition: Brand New
• Part Number: BCAP2.2
• 2 Year Warranty: (1 Year Manufacturer Warranty + 1 Year Warranty!)