Weather resistant, 100-percent acrylic latex. Cleans up easily with soap and water. May be used on wood, siding, trim, hardboard siding, primed metal, shakes, shingles, brick, cement, cinder, block, stucco, concrete, stone, asbestos, galvanized steel, aluminum and vinyl siding. DO NOT USE on glazed aluminum, glazed masonry, floors or steps. Lifetime warranty.
Features:-
- Finest Quality
- 100% Acrylic Latex
- One Coat Coverage
- Ultimate Durability
- Smooth Finish
- Gives Mildew Resistant Coating
Recommended Uses:
- Wood siding and trim
- Hardboard siding
- Primed metal
- Shakes & shingles
- Brick, cement, cinder block, stone & concrete
- Stucco
- Asbestos
- Galvanized steel, aluminum & vinyl siding
Colors and Base Information:
- White
- 5 Gallon
Typical Properties (4300 Series):
- Vehicle Type: Acrylic Resin
- Sheen: 30?C40 Units @ 60?? angle
- Solids by Volume: 38%
- Solids by Weight: 49%
- Weight per Gallon: 10.4 lbs./gal.
- VOC: Less than 50 g/L
- Viscosity: 90?C95 Krebs Units
- Dry Time: 77??F @ 50% Relative Humidity
- To the touch: 30 minute(s)
- Recoat: 4 hour(s)
- Washing: Allow at least 7 days before washing. Use mild detergent and sponge.
- Full Cure: 1 day(s)
- Surface Coverage:
- 400 sq. ft./gal.
- At: 4.0 mil Wet, 1.5 mil Dry
Storage and Disposal:
- Do not freeze.
- Keep container closed when not in use.
- Do not transfer contents to other containers for storage or disposal.
- In case of spillage, absorb with inert material such as sand or kitty litter.
- Dispose of contaminated absorbent, container and/or unused contents in accordance with local, state and federal regulations.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Reviews
There are no reviews yet.